Daxten THERMAL OPTIMISATION Брошура - Сторінка 7

Переглянути онлайн або завантажити pdf Брошура для Джерело живлення Daxten THERMAL OPTIMISATION. Daxten THERMAL OPTIMISATION 8 сторінок.

5. Best Practice:

Sealing cable openings in the raised ﬂoor

The majority of companies today are investing in expen-

sive cooling technologies to ensure the active hardware in the

racks can operate in a cool environment without failure. In spite

of these expensive investments, companies suffer from over-

heating and system failure caused by hotspots in the data centre.

The culprits are almost always unsealed or insufﬁciently-sealed cable

openings in the raised ﬂoor. The Uptime Institute states that up to 63%

of expensive cooled air is lost through unsealed cable openings; this condi-

tioned air is therefore no longer available for cooling vital locations and cabinets

where servers are located.

Bulky cable bundles are reliable sealed air-tight with

Daxten solutions.

Our sealing solutions consist of a special ﬁlament that seamlessly encloses cables and other equipment

protruding through the raised ﬂoor. The system is installed quickly using

a simple installation procedure. This can be either retro-ﬁtted to existing

cabinets without the need for downtime or put into new openings.

Sealing cable openings Highlights

• Up to 60% higher energy efﬁciency in the data centre

• Reliable sealing of openings in the raised ﬂoor and elimination of bypass airﬂow

• Prevents system failures and downtime caused by overheating and hot spots

• Signiﬁcant increase in under ﬂoor air pressure.

Daxten | Thermal Optimisation Best Practices

Sealing openings puts an end to bypass airﬂow

Conventionally, these problems have been solved

by increasing the capacity of the cooling systems. Often

companies invest in additional cooling units to maintain

air pressure and air ﬂow. However, this can be done much

more efﬁciently and at a lower price. Our solutions easily

close and seal cable openings. Your data centre will be

protected against the loss of cooled air, the formation of

hot spots and the risk of downtime. All of this can be done

using existing cooling units while signiﬁcantly increasing

capacity and increasing efﬁciency.

Installed in seconds with immediate effects

The split seal solutions are ideal for

the usage in existing cabling infrastrcutures.