Dynabrade 52415 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Шліфувальна машина Dynabrade 52415. Dynabrade 52415 4 сторінки. 3" disc sander
Також для Dynabrade 52415: Важливі інструкції з експлуатації, технічного обслуговування та безпеки (4 сторінок)
Друкувати сторінку
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Disassembly/Assembly Instructions-.7 Hp Rear Exhaust
8. Apply Loctite #567 PST Pipe Sealant (or equivalent) to threads of 94523 Inlet Adapter and install entire muffler assembly onto valve body
(torque 23.0 N•m/200 in. - lbs.).
9. Replace air fitting. Secure inlet adapter with a wrench before tightening air fitting. Install throttle lever and 12132 Pin.
Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.
Important: Motor should now be tested for proper operation at 90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the
tool, the tool should be serviced to correct the cause before use. Before operating, place 2-3 drops of Dynabrade Air Lube (P/N 95842) directly into air inlet
with throttle lever depressed. Operate tool for 30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor.
Loctite
®
is a registered trademark of Loctite Corp.
95281 – 19 mm open-end
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2000
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Optional Accessories
53032 – 1/4" Drill Chuck
Includes: 53052 Mated Chuck Key
Dynaswivel
®
Swivels 360° at two locations which
allows an air hose to drop straight to
the floor, no matter how the tool is held.
•
94300 1/4" NPT
52296 Repair Collar
•
Specially designed collar for use in vise to
prevent damage to valve body housing
during disassembly/assembly.
Wrenches
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
PRINTED IN USA
Collet Inserts
•
50065 – 1/8"
•
50016 – 6 mm
•
50039 – 8 mm
96045 Motor Tune-Up Kit:
•
Includes assorted parts to help maintain and
repair motor.
Email: [email protected]
(continued)
95262 – 14 mm open-end
®
DYNABRADE
Rev.1_PD00.81