Hi-Line DIN-DMX2-RJ45 Посібник з налаштування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з налаштування для Контролер Hi-Line DIN-DMX2-RJ45. Hi-Line DIN-DMX2-RJ45 2 сторінки. Din rail 4channels dmx512 led controller
Друкувати сторінку
www.hiline‐lighting.co.uk T.020 3807 0525
Setting active channel to "3": Channels 1/2/3 will respond at the DMX address 001/002/003,
Channel 4 will respond at the DMX address 001
Setting active channel to "4": Channels 1/2/3/4 will respond at the DMX address 001/002/003/004
3. Change the PWM frequency (200 or 1500Hz) or dimming curve
(Default setting is "200Hz", linear dimming)
Our LED controller operates on 2 different frequencies, the default is 200Hz and the alternative is
1500Hz
Pressing 1st & and 3rd button for 2 seconds "P‐c" will appear on the display (P=PWM frequency,
c=dimming mode)
P=2 (PWM frequency=200Hz), P=1 (PWM frequency=1500Hz)
c=2 (Linear dimming), c=1 (logarithmic dimming)
Specification
Input Voltage: 12 to 36 Volts DC
Output voltage: As per input voltage (12‐36V)
Maximum output current: 5 Amps per channel
Output Channels: 4 Channels
Output power: 4CH x 60‐180W each (12‐36V)
Mode: Constant Voltage
Signal input: DMX512
DMX Start Address settings: 1 to 512
Mounting: DIN Rail (3 Mod)
Number of modules: 3
Warranty: 5 Years