Gaggenau AF210792 Посібник користувача та інструкція з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Вентиляційна витяжка Gaggenau AF210792. Gaggenau AF210792 16 сторінок.
Друкувати сторінкуen Familiarising yourself with your appliance
5
Familiarising yourself with your appliance
Familiarise yourself with the parts of your appliance.
5.1 Controls
The controls are used to configure all functions of your
appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switches on fan setting 1.
Switches fan setting 2 on.
Switches on fan setting 3.
Switching on intensive mode
6
Basic operation
You can find out everything you need to know about
operating your appliance here.
6.1 Switching on the appliance
Lightly touch the centre of the filter pull-out.
▶
a The filter pull-out extends.
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
1.
Slide in the filter pull-out.
2.
6.3 Selecting a fan setting
Press , or .
▶
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
.
▶
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
6.5 Switching off intensive mode
Press , or .
▶
a Intensive mode is ended early.
6
Switching automatic mode on or off
Reset the filter saturation indicator
Switching the lighting on or off/
Setting the brightness
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Slide in the filter pull-out.
▶
a The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press .
▶
6.8 Switching off automatic mode
Press
or
.
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.
6.9 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
6.10 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
6.11 Switching on the audible signal
Requirement: The appliance is switched off.