Airconet HP240 Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Тепловий насос Airconet HP240. Airconet HP240 3 сторінки.

110-220VAC Heat Pump Thermostat installation guide

Model: Airconet-HP240

1. Remove the back panel using flat object

2. Mount thermostat's back cover

at upright position on the wall.

Cut cover and insert AirCon wires

3. Disconnect main power breaker and wire thermostat as follows:

Caution 1: the 5 outputs are 'Live'

Caution 2: Ensure AC switching is on Live (otherwise swop L and N)

4. Attach the thermostat to the back panel by pushing it onto the wall.

Ensure it is tightly mounted all around (confirm there is no gap)

5. Connect power supplies back

6. Press the thermostat's power button to ensure the thermostat is

connected properly. The display should show the room temperature

Screws

Cut out