Gaggenau AI 540-720 Інструкція з експлуатації та монтажу - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Вентиляційна витяжка Gaggenau AI 540-720. Gaggenau AI 540-720 20 сторінок. Freely suspended insular hood

Друкувати сторінку

1. Technical Data

6. Assembly instructions

WARNING - TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

a.)

Installation work and electrical wiring must be

done by qualified person(s) in accordance with

all applicable codes and standards, including

fire-rated construction.

b.) Sufficient air is needed for proper combustion

end exhausting of gases through the flue

(chimney) of fuel burning equipment to prevent

back drafting. Follow the heating equipment

manufacturer's guideline and safety standards

such as those published by the National Fire

Protection Association (NFPA), and the American

Society for Heating, Refrigeration and Air

Conditioning (ASHRAE), and the local code

authorities.

c.) When cutting or drilling into wall or ceiling, do

not damage electrical wiring and other hidden

utilities.

d.) Ducted fans must always be vented to the

outdoors.

e.) If this unit is to be installed over a tub or shower,

it must be marked as appropriate for the appli-

cation and be connected to a GFCI (Ground

Fault Circuit Interrupter) - protected branch

circuit.

f.) NEVER place a switch where it can be reached

from a tub or shower.

WARNING:

To reduce the risk of fire, use only metal ductwork.

6.1

Technical data

Weight without support frame and LK: 35 kg

Weight with support frame and LK: max. 60 kg

Dimensions : 47

´ ´ x 27

Electrical connection

Pay attention to the rating plate data.

The appliance must only be connected by an

authorised specialist. The specialist is

sible for perfect functioning of the appliance at its

installation location. He must explain the operating

principle of the appliance to the user with refe-

rence to the operating instructions. He must explain

to the user how the appliance can be isolated from

the mains whenever required.

Connection possibilities

The plug of the connecting cable is inserted into

the socket on the ceiling. If this is not possible, the

disconnection of all the poles of the appliance from

the mains must be achieved by way of the domestic

fuse, or by using an accessible disconnecting device

with a contact gap of at least 3.0 mm.

´ ´

respon-