Great Northern Docks 9079W Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Сходи Great Northern Docks 9079W. Great Northern Docks 9079W 2 сторінки. Aluminum swim ladder

Друкувати сторінку

Great Northern Docks

Assembly Instructions

for

20° Aluminum Ladder #9079W

Hex Bolt

Washer

Jam

Nut

Connect the ladder hoops to the oblong holes with

the ladder between each ladder hoop. Use two hex

bolts and two jam nuts from the ladder bolt kit bag.

Threaded ends of all bolts should point to the outside

of the ladder to avoid the path of swimmers.

Place a stainless washer on the bolts between the

ladder and the hoop to allow the ladder to swing up

and down without grinding.

Place a washer under the bolt head and under the nut.

Tighten these bolts before use.

up position so you do not have to hold it while trying

to attach it.

Having it assembled will space the hoops the right

distance apart from each other while you drill holes

in the dock for the attachment bolts.

Each Ladder hoop will receive two bolts, one will

pass through the decking and the other will go on

the outside of the hoop through the dock frame.

there is no need to drill and bolt the inside holes on

the ladder hoop brackets, doing so will prevent the

ladder from swinging down all the way.

After a hole has been drilled, insert a

carriage bolt to keep the ladder from moving while

you drill the next hole.

When attaching this ladder to a dock with

removable deck panels, make sure your decking is

fastened in place well enough to support the ladder

and a swimmer.

Use a backer board under the front of the hoop to

span benieth more than one deckboard as

reinforcement.

Use a washer and a nut from the ladder bolt kit bag

on each attachment bolt.