GREAT PLAINS BD7600 Посібник із швидкого старту - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сільськогосподарське обладнання GREAT PLAINS BD7600. GREAT PLAINS BD7600 20 сторінок. Box drill
Також для GREAT PLAINS BD7600: Посібник з польових налаштувань (12 сторінок)
Друкувати сторінку
6. Tap each blue field and input the desired values.
Refer to "Required System Inputs" on page 7
for more information.
Please Note: After you tap the blue field and
i
input
the
automatically saves the updated information.
Please Note: Each Product Profile must have
i
a unique name in the Renaming Field.
Single Box Hoppers: Skip to step 9.
7 . On Split-Box Hoppers: Once the required
system inputs have been entered, you must
assign a metering system to the product profile.
Tap
soft key to select the metering system.
Please Note: This soft key will toggle
i
between metering system 1 and metering
system 2. The selected metering system will
be displayed near the calibration factor.
Shown below.
Great Plains | 195-835QS | 03/25/2022
desired
value,
the
8. Confirm the metering system selection before
continuing. Metering System 2 selection shown
below.
9. Tap
system
Required System Inputs
The required system inputs within the Product
Database menu are:
Renaming
Product Type
Target Rate
Target Rate Increment
Calibration Factor
Metering System Selection (Split-Box Hoppers Only)
Please Note: Tap the blue field and input the
i
desired value for each field, the system
automatically saves the updated information.
BD7600 Quick Start Guide
soft key for Product Database menu.
7