DAYLIFF DQA25/60 Посібник з монтажу та експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Система водопостачання DAYLIFF DQA25/60. DAYLIFF DQA25/60 16 сторінок. Circulator pumps

Друкувати сторінку

Ensure no water leakage onto the pump motor or its

electrical connections during installation, venting or

operation as this may cause electrical shock.

WARNING

Any action that doesn't comply with safety warning sign

may cause personal injury, pump damage and losses in

property.

WARNING

regulations.

Do not install the pump in moist places.

WARNING

For easy maintenance, it is recommended to install

separate valve at the inlet and outlet of the pump. These

should be closed when the pump is not in use for a long

WARNING

time.

Dry running will void warranty.

WARNING

The pump should be stored in a cool, dry and well

ventilated place.

WARNING

3. INSTALLATION

3.1 Electrical Connection

If the electrical connection block is not in a convenient position when the

circulator pump is delivered, the motor head may be rotated prior to fitting.

To achieve this, release the screws on the pump casing and rotate the

motor head to its new position.

Take care not to remove or damage the 'O' ring seal between motor head

and pump casing.

Tighten the fixing screws in a diagonal pattern in stages to final torque of

25kg cm.

Check that the turns freely by loosening the manual Restart Knob until it

engages in the motor shaft. The motor should then be free to turn with the

finger tips.

Users must also comply with the local safety