Dynabrade 52836 Безпека, експлуатація та обслуговування - Сторінка 8
Переглянути онлайн або завантажити pdf Безпека, експлуатація та обслуговування для Дриль. Dynabrade 52836. Dynabrade 52836 9 сторінок. Pistol grip drill; .4hp/rear exhaust/1/4" drill chuck
Друкувати сторінку
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
Part No. 94300 – 1/4" NPT
Motor Tune-Up Kit
•
Includes assorted parts to help maintain and repair motor.
Part No. 96067
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer with greater
power and less down time.
Part No. 95821: 4oz. (118 ml)
Part No. 95842: 1pt. (473 ml)
Part No. 95843: 1gal. (3.8 L)
Bearing Removal Tool
•
This tool is designed to pass through the I.D. of the bearing
plate and push against the I.D. of the bearing.
Part No. 96210
2" Bearing Separator
•
Used to remove bearings, gears, and other components.
Part No. 96346
Reference Contact Information
1. American National Standards Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2009
Optional Accessories
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
Hex Key
•
This is used for the removal and installation of
the 52954 Spindle Nut
Part No. 95049 – 3/16"
Open End Wrench
•
This is used for removal and installation
of drill chuck.
Part No. 96453 – 16 mm
Grease
•
Multi-purpose grease for all types of
bearings, cams, gears.
•
High film strength; excellent resistance
to water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
Part No. 95542: 10oz. Grease Tube
Part No. 95541: Push-Type Gear Oil Gun
•
One-hand operation.
Bearing Press Tool
•
Use with (#2) arbor press to achieve accurate
press of bearings and motor parts.
Part No. 96240
Part No. 96244
Part No. 96216
Part No. 96239
Email: [email protected]
®
DYNABRADE
PRINTED IN USA