Hi-Z Antennas 4-8 PRO Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Антена Hi-Z Antennas 4-8 PRO. Hi-Z Antennas 4-8 PRO 15 сторінок. Up 8 element circle array

The Hi-Z Amplifier was designed to provide amplification and matching between the short verticals and the phase controller in

the Hi-Z phased array control systems. This amplifier is used on ALL Hi-Z phased array products. The amp is located at the base

of each short vertical. The connecting wires must be short, in the range or 8-10 inches long. When dressing or routing the wires

between the vertical and ground rod to the Hi-Z Amps, maintain as much separation between the ground and antenna wires as

possible. If these wires are to close it will degrade the system performance. The Hi-Z Amp MUST be Weatherproofed!!

Please review our application and technical notes to gain ideas for mounting the Hi-Z amplifiers near the base of the verticals.

See:

http://www.hizantennas.com/hiz_verticals.htm

Features:

•

Relay input (lightning and static protection, when power is off)

•

Easy connections to the base of the vertical and ground

Hi-Z 4-8PRO UP Manual V1.0

HF RECEIVING SYSTEMS & COMPONENTS

Hi-Z Antennas™ Hi-Z Amplifier

Hi-Z Amplifier