Hi-Z Antennas AL-24 Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Антена Hi-Z Antennas AL-24. Hi-Z Antennas AL-24 6 сторінок.

Hi-Z Antennas™ Models AL-18, AL-24 V2.0 Vertical Assembly Instructions – pg 2/6

BOM / Element

1ea .875" X 12" aluminum tube

1ea .750" dia FiberGlas rod

2ea 6X32X 1.5" SS PH Screws

3ea 6X32 SS K-lock nuts

1ea PVC shim

2ea #20 SS Clamps

1ea 13 inch wire with terminals

1ea 5 inch wire with terminals

CHOOSING A LOCATION FOR THE ANTENNA

For best performance, mount the antenna in a clear location away from

buildings, towers, feedlines, utility wires, and other antennas.

Never mount this antenna in a location that will permit unsuspecting

people to come in contact with any part of the antenna.

Never mount this antenna where a mechanical failure might allow the

antenna to contact power lines or other utility wires.

Always ground the feedline to a good earth ground at the point where It

enters a building for lightning protection.

First, check the parts you received. The

BOM to the left is the quantity per element upgrade.

Please take the time to read and understand the

Assembly procedures to ensure a great installation.

Any questions just email us at

Or call us at 541.543.9921.

HF RECEIVING SYSTEMS & COMPONENTS

NOTE:

HIGH PERFORMANCE