Hi-Z Antennas Hi-Z 8A-80 Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Антена Hi-Z Antennas Hi-Z 8A-80. Hi-Z Antennas Hi-Z 8A-80 14 сторінок. 160/80 meters 200/100 foot diameter circle, a models have the pre-amp external level1 plus amps, level2 with plus6 amps

Друкувати сторінку

Hi-Z Antennas™ Hi-Z Amplifier PLUS6

The Hi-Z Amplifier PLUS and PLUS6 was designed to provide amplification and matching between

the short verticals and the phase controller in the Hi-Z phased array control systems. This amplifier

is used on ALL Hi-Z phased array products. The amp is located at the base of each short vertical.

The connecting wires must be short, in the range or 8-10 inches long. When dressing or routing

the wires between the vertical and ground rod to the Hi-Z Amps, maintain as much separation

between the ground and antenna wires as possible. If these wires are too close it will degrade the

system performance.

Please review our application and technical notes to gain ideas for mounting the Hi-Z amplifiers

near the base of the verticals. See:

Specifications:

 Increased gain model – PLUS6 0dB (both models maintain 75 ohm output impedance)

 L=4.6 W=2.6 H=1.6 (not including the terminals or connectors)

Features & Benefits:

 Rugged weatherized enclosure

 No need to cover the amp, simplified mounting

 Reduces cost (enclosures) and time to mount and connect the Amp to the vertical elements

Hi-Z 8A Element Man. 3.0

HIGH PERFORMANCE

HF RECEIVING SYSTEMS & COMPONENTS

http://www.hizantennas.com/hiz_verticals.htm

Hi-Z Amp PLUS6