DYNABREEZE HE-51030 Інструкції та посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкції та посібник користувача для Електричний обігрівач DYNABREEZE HE-51030. DYNABREEZE HE-51030 13 сторінок.
Друкувати сторінкуASSEMBLY & OPERATION
First time use, you may notice a slight emission of smoke. This is quite normal & it will
stop after a short time. The heating element is coated with a protection oil.
• This Heater is pre-assembled.
• Position the Heater so it stands upright & is on a firm surface and at a
safe distance from wet environments and flammable objects.
• Connect the plug to the relevant power source.
• Set the thermostat dial (right knob) to MAX & settings switch (left knob)
to the highest setting and let the Heater operate on full power for 5 to 10
minutes.
• Adjust the thermostat dial (right knob) to the required temperature.
• Once the room reaches the required temperature, the heating
element will cut-out. Once the ambient temperature decreases, the
heating element will cut back in. The fan Heater now starts and stops
automatically and thus keeps the room temperature constant.
• Before switching off the Heater, please turn the thermostat to the MIN
position & turn the switch to fan position. Allow the appliance to cool
down for two minutes and then turn off the Heater and pull out the plug.
DO NOT TURN THE HEATER OFF FROM THE POWER SOURCE UNTIL
AFTER COOLING THE HEATER DOWN.
6 3KW ELECTRIC HEATER