Gaggenau EM 204-630 Інструкція з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Мікрохвильова піч Gaggenau EM 204-630. Gaggenau EM 204-630 8 сторінок. Built-in microwave ovens
Друкувати сторінкуStep 4: Installing the Microwave Oven (continued)
Step D
1.
Slide microwave oven part way into cabinet
opening. (Bottom bracket must be flat to the
cutout floor to engage correctly with anti-tip
brackets as shown).
2.
Plug in the microwave oven.
3.
Center the microwave oven within the cut-
out opening and slide the microwave oven
in the anti-tip bracket. (Ensure the microwave
oven is accurately centered.
4.
Drill pilot holes (use
through the positioning flange and then in-
1
stall three
/
" screws at the front of the bot-
2
tom duct as shown.
Step 5: Installing the Trim Kit
1. Place the trim kit frame over the microwave oven.
Important Note: Trim kit frame orientation is
2. Make sure the trim kit is level and centered with
respect to microwave oven. Mark four hole cen-
ters through the four mounting holes of the trim
kit.
NOTE: Center the trim kit frame equally on all
four sides.
3. Remove the trim kit and drill four pilot holes. (use
7
/
drill or #35 drill)
64
4. Attach the trim kit frame by using four 1" screws.
Make sure that the orientation is correct as
stated above.
5. Your trim kit is now fully installed. Replace
any loose items that have been removed from
inside microwave oven.
6. Please keep this installation instruction for
future reference.
7
/
" drill or #35 drill)
64
important. Orient the frame
so the louvers are sloping
downward to the front. (See
Figure Detail A).
Bottom
Duct
Anti-tip
Bracket
1
/
" screws
2
"A"
1" Screw
7
Anti-tip
Assembly
1
/
" screw
2
Bottom
Bracket
Cutout
opening
Positioning
flange
Pilot
hole
Cutout
Opening
Trim Kit
Mounting
hole
Figure Detail of "A"