CEL POWERminidriver Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент CEL POWERminidriver. CEL POWERminidriver 16 сторінок. Lithium ion screwdriver
Друкувати сторінкуCharging
If the unit is damaged in any way do not
attempt to charge it and replace
immediately.
The battery is not removable or
serviceable in this product.
Keep clear of any moisture, direct sunlight
or temperature extremes.
The POWERmini driver can be charged
either in the Charger Dock or through
the socket on the handle.
To charge on the Charger Dock:
• Fully unwind the charger cable, plug into
a suitable mains outlet and switch the
power on.
• Fit the plug securely into the socket on
the charger dock.
• Place the POWERmini driver into the
dock so the contacts on the base of the
handle meet those in the dock. Ensure
there is no obstruction and the driver is
stable and secure.
To charge the POWERmini driver
directly from the charger:
• Fully unwind the charger cable, plug into
a suitable mains outlet and switch the
power on.
• Place the POWERmini driver in a safe
and dry place and insert the charger lead
into the handle of the unit.
LED
Contacts
Charger
Lead
The LED light on the handle of the
POWERmini driver will turn red while
the battery is charging and turn off
once the battery is fully charged.
Note: The LED light
will flash when the
battery capacity is
too low and needs
charging, or when a
charging error is
encountered.
4.0