DynaColor 900 series Hybrid Посібник з налаштування - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з налаштування для ВІДЕОРЕЄСТРАТОР DynaColor 900 series Hybrid. DynaColor 900 series Hybrid 11 сторінок. Lite h.264 dvr

Друкувати сторінку
17
ESC
18
ENTER

Rear Panel

LAN 10/100/1000M
1
(RJ-45)
Alarm I/O, RS-485
2
& Audio In
Main Monitor –
3
BNC
Call Monitor
4
(BNC)
Video In
5
(BNC)
6
USB Port
VGA/BNC Switch
7
Main Monitor –
Digital Output
8
(Optional)
Main Monitor –
9
VGA
Main Monitor
10
Audio Out
Call Monitor
11
Audio Out
Power Jack
12
NOTE: The DVR can only connect to one main monitor at a time. There is no simultaneous
display.
2
Press this key to cancel or exit from certain control mode.
1. In OSD menu or selection interface, press these key to make the
selection or save settings.
2. In live full-screen viewing mode, press this key to view a 2× zoom
image; press it again to return.
The DVR is capable of networking. Once the unit is connected to the
LAN network, users can remotely access the DVR through the remote
software on a PC.
The D-Sub connector provides alarm I/O, RS-485 & Audio In ports that
offer users the flexibility to connect required devices to the DVR.
The DVR can connect to a BNC monitor via the BNC connector.
The BNC Call Monitor connector allows users to connect the DVR with
a call monitor.
A group of BNC connectors is provided for video input streams from
installed cameras. The DVR will detect video source of CH1 and
automatically adjust the system to NTSC or PAL video system.
This USB port allows users to connect a USB mouse with PS/2
protocol.
The VGA/BNC switch allows users to select the type of main monitor:
BNC or VGA/Digital Output.
The DVR can connect to a Digital Output monitor via an optional
Digital Output connector.
The DVR can connect a VGA monitor via the VGA connector.
Main Monitor Audio Out RCA connectors are provided for the DVR to
connect audio output devices (e.g. amplified speakers).
Call Monitor Audio Out RCA connectors are provided for the DVR to
connect audio output devices (e.g. amplified speakers).
The DVR has a free voltage DC power connection jack. Please
connect the power supply adapter shipped with the unit.