GREAT PLANES EP FALCON ARF Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Іграшка GREAT PLANES EP FALCON ARF. GREAT PLANES EP FALCON ARF 16 сторінок.

Pressed all the way down

❏

4. Center the trims and connect a battery to the ESC to

power the system up. Mount the servo arms 90°—or as close

to 90° as you can get—to the servos and install the servo

screws. Be certain the servo arms are all the way down on

the toothed output shafts before installing the screws.

❏

5. Disconnect the servos and the ESC from the receiver.

Use the tiny wood screws included with this kit or the screws

included with your servos to mount the servos to whichever

Yes

of the two balsa servo trays ﬁ ts your servos. Add a small drop

of CA to the tips of the screws where they come through the

bottom of the servo tray.

❏

6. Fit, then glue the servo tray into position—although the

parts you are gluing here are balsa and regular CA could be

used, foam-safe CA is still recommended.

Mount the Motor

❏

1. If using the recommended APC 8 x 3.8 Slow-Flyer

propeller, install the larger I.D. spacer ring that came with

the propeller into the back of the propeller hub. Reinstall the

propeller adapter on the RimFire 250 motor so the propeller

will mount on the large end of the adapter—don't forget to

use a tiny drop of threadlocker on the threads of the adapter

screws. Note: If the heads of the adapter screws interfere

with the base of the propeller hub not allowing the hub to lie

ﬂ at and square, carefully chamfer the base of the hub just

enough to clear the screws.

NO!

Gap

YES!

No gap