GREAT PLANES L-39 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Іграшка GREAT PLANES L-39. GREAT PLANES L-39 16 сторінок. Electrifly series

BEFORE YOU BEGIN

Before building the model, please follow the assembly and

break-in instructions that can be found in the manual that

accompanies the included ducted fan unit. Two 2.5mm x 5mm

machine screws and two 2.5mm ﬂ at washers are included to

™

mount the Ammo

20-40-3500kV brushless motor inside the

fan housing.

❏

1. Begin by centering the aileron servos with your radio

system. Cut three arms from two four-armed servo arms.

Enlarge the outer holes in the servo arms with a 1/16"

[1.6mm] drill bit. Attach the servo arms perpendicular to the

aileron servo cases using the servo arm screws (be sure to

make a left and right aileron servo).

❏

2. Attach a 6" [150mm] servo extension to each aileron

servo. Use tape or heat shrink tubing (not included) to secure

the connectors.

❏

3. Glue the servos into the aileron servo bays using CA

glue or epoxy. Route the servo leads down the servo lead

channel and through the slots near the center of the wing.

6 6 6