GREAT PLANES Spectra Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Іграшка GREAT PLANES Spectra. GREAT PLANES Spectra 16 сторінок.

ASSEMBLY

1. Locate the wing joiner and insert it into the right wing

joiner pocket as shown in the above picture.

2. Insert the other side of the wing joiner into the left wing

joiner pocket and slide the wings together.

3. Completed wing

1. Find and open the holes in the stabilizer covering for the

attachment screws. Attach the stabilizer to the fuselage using

two 2mm x 15mm screws, two 2mm nuts and four 2mm

washers. Use thread lock on the nuts to prevent loosening.

2. Open the holes on the top and bottom of the fuselage

covering for the fin attachment. Attach the fin using two

2mm washers and two 2mm nuts. Use Great Planes Pro

Threadlocker on the nuts to prevent loosening.

3. Install the wing dowels. Note that the smaller dowel

(7mm x 90mm) should be installed into the aft holes.