GREAT PLANES Spirit 100 Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Іграшка GREAT PLANES Spirit 100. GREAT PLANES Spirit 100 20 сторінок.

❏

2. Remove the covering from the top and bottom of the

four wing bolt holes on the wing.

❏

3. After the epoxy on the wing joiner has fully cured fit the

joiner in the wing. It might be necessary sand the joiner so it

will fit in the wing. The fit needs to be tight so sand small

amounts and take your time.

ASSEMBLE THE FUSE

❏

1. Trim the covering on the horizontal stabilizer from the

LE slot and the bolt hole. Apply thin CA to the exposed wood

in the LE slot.

❏

2. Mount the stabilizer to the fuse with a 6-32 x 3/4"

[19mm] socket head cap screw and #6 washer.

❏

3. Cut three 3/4" x 1" [19 x 25mm] CA hinges from the

supplied 2" x 9" [50 x 230mm] CA hinge strip. Snip off the

corners so they go into the rudder/fin easier.

3/4" [19mm]

1" [25mm]