HiB LIBRA 21400 Інструкція з монтажу Інструкція з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Інструкція з монтажу для Засоби особистої гігієни HiB LIBRA 21400. HiB LIBRA 21400 8 сторінок.

Друкувати сторінку

Installation

1. Position the magnifying mirror in a suitable location according to the zonal

diagram, see Fig.1, ensuring that the domestic electrical mains supply is within

reach of the electrical entry point of the product. Do not position in direct

sunlight as the magnifying effect of the mirror may pose a fire hazard.

2. Remove the wall bracket from the base of the mirror via the fixing(s) on the base

of the unit see Fig 2&3.

3. Using the wall bracket as a guide, carefully mark the required drilling locations

using a soft pencil, ensuring it is level. Remove the wall bracket. Please ensure

all marked drill positions accurately match up with the fixing points of the

wall bracket before drilling.

4. Using a suitable drill bit, drill holes in the marked positions to a suitable depth.

If drilling through tile, use a ceramic drill bit.

5. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,

wall plugs should be inserted below the tile surface to avoid cracking. NB. For

plasterboard walls, specialist fixings should be purchased, available from

any DIY or hardware store.

6. Fix wall bracket into wall plugs.

7. Connect the domestic mains supply to the terminal box according to the wiring

diagram.

8. Place the mirror onto the wall bracket and secure into place using the fixing(s)

on the mirror base – take care not to trap wiring when assembling the mirror

onto the wall bracket.

9. Switch on the domestic electrical mains supply to the mirror.

hib.co.uk