GREAT PLANES XPD-8 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Іграшка GREAT PLANES XPD-8. GREAT PLANES XPD-8 16 сторінок.
Друкувати сторінку
If you have purchased the version of the XPD-8 ARF that
includes the HyperFlow
™
is also included so you will not need to purchase a motor. If
you purchased the XPD-8 ARF without the EDF unit and
motor, or if you plan to install an optional brushless motor,
consult the Hyperflow EDF manual. This manual is available
at our web site at www.greatplanes.com, and contains
performance charts and motor requirement data that will be
useful in choosing a brushless motor.
Electronic Speed Control
An ESC (Electronic Speed Control) with BEC (Battery
Eliminator Circuitry) is required. The BEC allows both the
motor and the radio system to be powered by the same battery
(thus eliminating the on-board receiver battery). The Great
Planes ElectriFly C-25 Mini Brushed ESC (GPMM2025) is
recommended for use with the 370 BB brushed motor.
If using a brushless motor, be sure to choose an ESC
designed specifically for brushless motors and one that is
capable of handling the current draw of your application.
ADDITIONAL ITEMS REQUIRED
Adhesives & Building Supplies
The only adhesive required to build the XPD-8 ARF is
6-minute epoxy or foam-safe CA glue. Either one works well.
❏
Great Planes Pro
™
Epoxy 6-Minute Formula
4 oz. [113g] (GPMR6042)
❏
Great Planes Pro Foam Safe CA- Thick Glue
1 oz. [28g] (GPMR6072)
❏
Clear tape
This manual also refers to using a 3/8" [9.5mm] brass tube
for cutting holes in foam, 1/16" [1.6mm] and 3/64" [1.2mm]
drill bits.
❏
K&S Round Brass Tube 3/8" [9.5mm] (K+SR5135)
❏
Hobbico
®
Pin Vise 1/16 [1.6mm] Collet w/6 Bits (HCAR0696)
Optional Supplies & Tools
Here is a list of optional tools that will help you build the
XPD-8 ARF.
❏
2 oz. [57g] Spray CA activator (GPMR6035)
❏
4 oz. [113g] Aerosol CA activator (GPMR6034)
❏
CA applicator tips (HCAR3780)
❏
Epoxy brushes (GPMR8060)
Motor
EDF unit, a 370 BB brushed motor
❏
Mixing sticks (GPMR8055)
❏
Mixing cups (GPMR8056)
❏
Rotary tool such as Dremel
❏
Rotary tool reinforced cut-off wheel (GPMR8020)
❏
Servo horn drill (HCAR0698)
❏
AccuThrow
Deflection Gauge (GPMR2405)
™
❏
CG Machine
™
(GPMR2400)
❏
Hobbico Flexible 18" Ruler Stainless Steel (HCAR0460)
IMPORTANT BUILDING NOTES
•
When you see the term test fit in the instructions, it
means that you should first position the part on the
assembly without using any glue, then slightly modify
or custom fit the part as necessary for the best fit.
•
Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use.
When a specific type of adhesive works best for that
step, the instructions will make a recommendation.
•
Whenever just epoxy is specified you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy.
When 30-minute epoxy is specified it is highly
recommended that you use only 30-minute (or
45-minute) epoxy, because you will need the working
time and/or the additional strength.
•
Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following
steps to get another view of the same parts.
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes XPD-8 ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose "Where to Buy" at the bottom
of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
number and expiration date for payment.
4
Moto-Tool
®
®
®
or MasterCard
®