GREAT PLANES ElectriFly PEAK 400 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зарядний пристрій GREAT PLANES ElectriFly PEAK 400. GREAT PLANES ElectriFly PEAK 400 13 сторінок.
Друкувати сторінку
clean DC power source whose output is filtered to remove
unwanted electrical noise. To achieve maximum potential,
the power source must be capable of delivering at least
3 amps of current while maintaining 12 volts DC.
Disconnect the charger when not in use.
WARNING! Make sure the charger's positive (+) and
negative (-) input connections are never accidentally
shorted together when connected to 12V DC power.
Failure to do so could result in permanent damage to
the power source and the charger.
B
A
TTER
Y CONNECTION & CONTR
OLS
B
A
TTER
Y CONNECTION & CONTR
OLS
Power: Connect the charger to the desired power source,
using the appropriate alligator clip lead. The yellow
"POWER" LED will illuminate when power is applied.
Charge Connector: The Peak 400 battery charger is
equipped with a standard battery connector. A "standard" to
"2-pin" adapter is also included. Securely connect the battery