GREAT PLANES Slot Machine Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент GREAT PLANES Slot Machine. GREAT PLANES Slot Machine 8 сторінок. Motorized hinge slotting tool
Друкувати сторінку
7. Remove the blade attachment screws
and slide the blade out of its pocket in the
blade holder. Notice that one corner of the
blade has a 45-degree angle, and note the
direction of that angled corner.
9. Repeat steps 8 - 11 to replace the
other blade.
11. Pivot the blade assembly up into the
housing, and wiggle the blade holder into
position so the screws can be installed.
Reinstall the rear Phillips head screw
(larger diameter) through the housing and
through the dog on the top of the rear
blade holder guide. Tighten snugly, but do
not over tighten.
13. Reinstall the front Phillips head screw
(smaller diameter). This screw must
engage the dog on the top of the blade
holder guide. Tighten securely, but do not
over tighten.
8. Insert a new blade into the blade holder with
the 45-degree angled corner matching that of
the pocket in the blade holder. Install the
screws tightly.
10. Press the blade holders together and
slide the guide back over the blade holders.
12. Insert the blades through the slot in
the blade access hatch and snap the
hatch into place.