Dynacord AM 12 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Dynacord AM 12. Dynacord AM 12 12 сторінок. 360 w high efficiency 2 way active cabinet
Друкувати сторінку
CABLING
Loudspeaker cable - Experience has shown that cable with rubber jacket, a diameter of 2.5mm2 per
conductor, and SPEAKON-type plugs and jacks represent the optimal speaker connection solution.
Connect the SPEAKON-type connectors on the rear panel of the AM12 according to the example in the
diagram. DYNACORD loudspeaker cables that have SPEAKON-type connectors as well as any other
types of cable are available from your dealer.
LF-cord
For connecting audio signal sources to the AM12, we recommend using cable with balanced XLR-type
or stereo phone plug connectors. Using balanced cable reduces the risk of sound degradation resulting
from interference. However, make sure to mind the pin-assignment as shown below. Original DYNACORD
cable from our accessory program will always comply with this pin-assignment.
XLR MALE
XLR FEMALE
15
C A B L I N G
balanced connecti-
on of microphones
unbalanced
external equipment
w i t h
X L R - t y p e
in/output jacks
balanced
unbalanced
external equipment
w i t h
X L R - t y p e
in/output jacks
balanced