Automated Logic ZS Plus Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Automated Logic ZS Plus. Automated Logic ZS Plus 16 сторінок.
Друкувати сторінку
ZS Pro Sensor
Navigating the sensor's screens
The control program determines what screens you see, what information is in each screen, and what
you can adjust. The type of sensor also determines what you see. For example, if the sensor reads
temperature, humidity, and CO
This screen...
Home
Setpoint adjustment
Information
Diagnostic
Reading the display
Depending on the control program and the type of sensor, you may see any of the following items in the
sensor's screens.
This item...
or
ZS Sensors
Rev. 4/27/2015
A ZS Pro lets you:
•
View information in the display such as zone temperature,
setpoints, outside air temperature, and equipment status
•
Make the zone warmer or cooler
•
Override the schedule to put the zone in an occupied state
•
Edit information if allowed by the control program
•
Force the zone to an unoccupied state
•
See that the zone is in an occupied state when the green LED is
lit
, the Home screen may cycle through the current values.
2
Displays when...
The sensor has had no user interaction for 5 seconds.
You press the
(page 5).
You press the
button. Tap the button to cycle through various
information.
You hold the
button for 3 seconds. Tap the button to cycle through
various information to troubleshoot your system.
Indicates...
The temperature is Fahrenheit or Celsius.
The value shown is percent relative humidity.
ALC Proprietary and Confidential
or
button. See To make the zone warmer or cooler
3
© 2015 Automated Logic Corporation
All rights reserved