Automated Pet Care Products LITTER-ROBOT Посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник для Засіб для догляду за домашніми тваринами Automated Pet Care Products LITTER-ROBOT. Automated Pet Care Products LITTER-ROBOT 16 сторінок. Self-cleaning litter box
Також для Automated Pet Care Products LITTER-ROBOT: Посібник (18 сторінок), Посібник користувача (19 сторінок)
Друкувати сторінкуAutomated Pet Care Products, Inc.
Cycle
OK/
Waiting
Automated Pet Care Products, Inc.
Control Panel
1.
Cycle Button
Press "Cycle" at any time to run a manual cleaning
cycle. To stop the cycle, press any button while
Litter-Robot is cycling. Press "Cycle" again to
resume the cleaning cycle.
Press "Fill" or "Empty" after stopping the globe, this
will return the Globe to the home position.
2.
Fill Button
Press "Fill" to rotate the globe to bring the waste
ports to a convenient position for adding litter.
After filling the Globe, you can press any button to
return the globe to the home position.
3.
Empty Button
This cycle removes all litter from the Globe,
bypassing the filter screen and septum. This is
convenient if you want to remove all old litter prior
to cleaning the interior of the Globe.
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
Fill
Empty
Cycling/
Sensor/
Timing
In Use
Patent #5,662,066
11
Automated Pet Care Products, Inc.
Press "Empty" to bring the waste ports to the
bottom-most position. The Litter-Robot will rotate
clock wise to dump the litter into the waste drawer.
Litter-Robot will stop in the appropriate position.
Press any button to stop the rotation if you want to
interrupt the Empty cycle. After the litter has
dumped into the waste drawer, you can press any
button to return the Globe to the home position.
4.
Green Light
OK/Waiting - This light indicates that Litter-Robot is
waiting to be used, and everything is OK.
5.
Yellow Light
Cycling/In Use - a cycle is in process (cleaning
cycle, fill cycle, or empty cycle).
6.
Red Light
Sensor/Timing - This light indicates that the cat
sensor has been tripped and the Litter-Robot is
going through a 7 minute count-down before
starting a cleaning cycle.
NOTE:
If the sensor is tripped again within the 7 minutes
of the count-down, the timer will reset and the
globe will not turn until another 7 minutes have
elapsed. You can cancel the "cat detected" 7
minute count-down (red light is on) by pressing any
button.
12
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com