Automated Pet Care Products LITTER-ROBOT Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Automated Pet Care Products LITTER-ROBOT. Automated Pet Care Products LITTER-ROBOT 19 сторінок. Self-cleaning litter box
Також для Automated Pet Care Products LITTER-ROBOT: Посібник (16 сторінок), Посібник (18 сторінок)
Друкувати сторінкуInstalling Garbage Bags in the Waste
Drawer
Your Litter-Robot is shipped with a 13 gallon trash bag
already installed in the waste drawer - two extra trash
bags have been provided. The standard 13 gallon bags
were chosen for their size, availability, and low cost.
Standard 8 gallon trash bags also work well.
To install a 13 gallon trash bag in the waste drawer,
open the bag and push the rim of the bag into the (5)
rubber grommets . Make sure that the opening of the
bag is taut and that it covers the entire perimeter
between the (5) grommets.
Push edge of bag into grommets
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
10
Filling the Litter-Robot with Litter
The Litter-Robot litter sifting system requires a clumping
type litter to work properly. Clumping clay litter is
recommended. This type of litter will have the words
"clumping" or "scoopable" on the bag or container. The
Litter-Robot is also compatible with World's Best Cat
Litter, Feline Pine Clumping, Litter Pearls, and crystals.
Litters that do not work in the Litter-Robot are the
strictly absorbent clay-based, non-clumping litters,
newspaper based litters, Feline Pine Absorbent Pellets,
and Swheat Scoop. If you are using a litter alternative
not listed here, you can contact us at
robot.com
to make sure you are using a compatible
litter.
If you are filling the Litter-Robot for the first time we
recommend that you do not switch litter brands at this
time. Your cats need to get used to this new litter box
and introducing a new kind of litter may increase their
level of apprehension. However, if you are currently
using a non-clumping litter you will need to switch to a
clumping style litter.
To fill the Litter-Robot with litter, follow these steps:
1.
Make sure the Litter-Robot is turned on and that
the Globe is in the home position.
2.
Litter can be added to the Globe in two ways:
•
Filling through the entry/exit opening (Step 3)
•
Filling through the square waste ports (Step 4)
11
40 W. Howard, Suite B-5, Pontiac, MI 48342
Toll Free: 877-250-7729 Fax: 248-253-1797
www.Litter-Robot.com
help@litter-