HIBLOW HP-10 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Насоси для ставків HIBLOW HP-10. HIBLOW HP-10 5 сторінок.

HP- 10〜50

CAUTION

！

●Be sure to unplug the pump unit.

●When performing replacement work, the pump body may be still hot and you may get

burnt. Therefore, wait until the pump has been allowed to cool.

●Be sure to remove the chamber block and the actuating rod before replacing the

electromagnet.

●It is better to let an experienced technician handle the soldering process.

Take precautions against being burnt.

●In case of HP-10/20, do the same way of replacing the electromagnet.

STEP

REMOVING THE ELECTROMAGNET

Cut the wire from the terminals on the

electromagnet with nippers.

●It is recommended that you make a note of the wiring.

STEP

Remove the nuts with the box driver.

(7mm wrench.)

STEP

Pull out electromagnets from the pump body.

REPLACING THE ELECTROMAGNET