Great Well Electronic BT-019 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури Great Well Electronic BT-019. Great Well Electronic BT-019 6 сторінок.

a．Make sure headset is in power-on mode. ( Details as 2.9 How to open headset)

b．Make sure without other Bluetooth devices in pairing mode within 10m.

c．Long press "VOL + and VOL－" about 3sec till BLUE AND RED LED flash alternatively.

Loose "VOL + and VOL－", headset is in waiting mode.

d． Choose Bluetooth on the connection type of Bluetooth mobile phone, after entry menu, choose

"lookup and search pairing device" ( Details as Bluetooth mobile phone specification)

e. Then，press Confirm on mobile phone, it shows "input ID Code" on screen of mobile

phone，please enter PIN Code"0000" ；When BLUE LED of Bluetooth headset flashes slowly, it

means successful pairing. The headset is in standby mode and can be used normally.

Note：If RED LED of headset flashes, it shows low battery of Bluetooth headset.

2．2 Wearing BT-019 Bluetooth headset：

With clip type design, you can clip BT-019 on clothes and wear earphone on left and right ear

if you like.

2．3 Receiving a phone call

When there is an incoming call, press the Multi-function Button once to answer the phone call.

2．4 How to end a phone call

During a phone call, press the Multi-function Button once to answer the phone call.

2．5 Refuse an incoming call

After hearing indication voice for incoming call, press VOL- for 3sec.

Note: the function needs mobile phone to support.

2．6 Make a call

a．Make a call through mobile phone, set up on mobile phone firstly, send calling to handsfree

or headset, then dial number as usual, begin speaking after answer, headset will connect

automatically. If end up a call, press the Multi-function Button.

b．Make a call by voice command (only apply to mobile phone supported the function).

Firstly, connect headset by handsfree operation. Secondly, long press VOL+, you will hear

voice prompt. Then speak name and telephone number loudly and clearly to microphone on

headset. If there is trained voice command on mobile phone, it can dial telephone you want.

2．7 Redial the last calling phone

Press "VOL -" for 3sec, redial the last telephone number after hearing the voice.

Note：

a．Mobile phone has not any incoming call and is not in speaking mode.

b．The function only works on Bluetooth mobile phone under application mode of handsfree.

2．8 Voice transfer from headset to mobile phone

When you need to use mobile phone to make a call, please press VOL+. The voice has transferred

from headset to mobile phone after hearing the voice for 3sec.

2．9 How to open headset

When using headset again, you need not to pair headset with mobile phone and only need to open

headset to connect automatically. Power-on method: press Multifunction Speaking Button for 5sec

until BLUE LED flashes, then loose.

If successful connection, BLUE LED flashes 3 times every 3sec, it shows headset can open

telephone or be in standby mode.

Note：RED LED will flashes if low battery.

2．10 Close headset

Press Multifunction Speaking Button about 3sec till RED LED flashed, you will hear a voice

from headset and then loose Multifunction Speaking Button, the headset will power off now.