Daytona DS300LRG Посібник користувача та інструкції з техніки безпеки - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача та інструкції з техніки безпеки для Валети. Daytona DS300LRG. Daytona DS300LRG 13 сторінок. Low profile long reach floor jack
Друкувати сторінку
Troubleshooting
TO PREVENT SERIOUS INJURY:
Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load.
Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide
do not solve the problem, have a qualified technician inspect and repair the jack before use.
After the jack is repaired: Test it carefully without a load by raising and lowering it fully,
checking for proper operation, BEFORE RETURNING THE JACK TO OPERATION.
DO NOT USE A DAMAGED OR MALFUNCTIONING JACK!
Jack will
Saddle
not lift at
lowers
capacity
under load
does not lift all the way
X
X
X
X
X
Item 64785
POSSIBLE SYMPTOMS
Pump stroke feels
Handle moves
spongy or Saddle
up when Jack
under load
X
For technical questions, please call 1-888-866-5797.
Fill Plug leaking
oil or Jack will not
lower without a load
X
X
PROBABLE SOLUTION
(Jack must not be supporting a load
while attempting a solution.)
Check that Release Valve
is fully closed.
Bleed trapped air from the hydraulics.
Valves may be blocked and may not
close fully. To flush the valves:
1. Lower the Saddle and securely
close the Release Valve.
2. Manually lift the saddle
several inches.
3. Open the release valve
and force the saddle down
as quickly as possible.
Jack may be low on oil.
Check the oil level and fill if needed.
See step 4 on facing page.
Jack may have air trapped
in the hydraulics.
Follow instructions for
Bleeding Trapped Air on page 6.
Jack may have too much
hydraulic oil inside, check
oil level and adjust if needed.
Fill Plug
Oil
Piston
Cylinder
FILL LEVEL
Page 9