Great White GW9500 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос для басейну Great White GW9500. Great White GW9500 12 сторінок. Automatic pool cleaner

Follow drawing that most closely resembles your skimmer installation.
A
Water
Level
Vacuum
Regulator
Reducer
Cone
Skimmer
Port
1901 0795
Clicking sound
This sound is the oscillator moving back and forth in
the oscillator chamber. The best speed for it is about
500 oscillations per minute. The vibration created by
the oscillator moves the bristles and the cleaner. If the
oscillator is running too fast, the cleaner will have a
tendency to climb up the pool wall past the waterline,
or "walk out of the pool".
Movement around the pool
Random motion – The cleaner will visit most spots in
the pool in a 6 hour period. It is not specifically pro-
grammed and cannot see the dirt you are seeing. It is a
random motion cleaner.
The cleaner was designed to spend most of its time in
the deep end, where most of the floor and wall area
exists. During a 6 hour period the cleaner will visit the
HOSE CONNECTIONS:
Elbow
(User
Supplied)
Skimmer
Vac Plate
(Skimmer
Basket is
underneath)

ABOUT THE CLEANER OPERATION:

B
Water
Level
Vacuum
Regulator
Reducer
Cone
shallow end a few times.
Rotating motion – The cleaner will rise up on one side
and pivot a few times per minute. This is normal and
provides the following:
1. Allows leaves that are being pushed or dragged along
to be sucked up into the vacuum chamber.
2. Allows the cleaner to:
Change direction
Get out of corners
Get away from ladders
Submerge below pool water level
Get off of domed main drain covers
Picks up big "stuff"
The cleaner will pick up some debris so large that it
may jam. Simply stop the pump and remove the debris
from the oscillator or the swivel assembly.
4
C
Water
Level
4" Hose
Vacuum
Regulator
To Pump
Suction
Hose
Adapter
Dedicated
Vacuum
Port