HIBLOW HP Series Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Водяний насос HIBLOW HP Series. HIBLOW HP Series 7 сторінок.
Також для HIBLOW HP Series: Посібник (5 сторінок), Посібник (8 сторінок), Посібник (9 сторінок)
Друкувати сторінку
HP- 60/80
STEP
STEP
REPLACEMENT OF SAFETY PIN
8
8
Check that the broken screw is removed from unit.
●If the broken pin is left inside the unit, it can get caught
in between electromagnets and actuating rod, which
can cause breakdown.
STEP
STEP
9
9
Insert a new safety pin through the hole on the
terminal side.
(Please Insert safety pin through the spring
electrode, L-shaped lever in such order.)
STEP
STEP
10
10
Install the locking collar from the other side of the
terminal and insert it until it clicks.
STEP
STEP
11
11
This completes the replacement of the safety pin
procedure.
Make sure the gaps between L-shaped lever and
tab of the actuating rod is even.
●Be careful not to touch the terminal when the power is
on, testing the operating conditions as this will result in
an electric shock.
●Unplug the pump immediately after the check.
4
Goodies Wastewater Supplies
Phone: 1300 282 181 Fax: 1300 282 989
PO Box 1524, Oxenford QLD 4210 35 Scenic Cr, Coomera QLD 4209
Email: [email protected] Web: www.goodies.net.au
REPLACING THE CHAMBER BLOCK