7th Sense medialon Showmaster Go Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління 7th Sense medialon Showmaster Go. 7th Sense medialon Showmaster Go 9 сторінок. Ruggedized show control and audio playback
Також для 7th Sense medialon Showmaster Go: Посібник користувача (2 сторінок)
Друкувати сторінку
When adding blanking plates, present these to the outer side first to avoid scraping down a
server side. The screw holes in the plates are asymmetric, so check that the holes align with the
finger screws.
Use the cable tie eyelets on the rear base of the tray to secure loose cables as needed.
The tray itself is supported in the server rack by the two side plates. These are slotted to
receive the pins on the sides of the tray.
Secure the side plates as shown below (here a Showmaster Go is co-hosted in the rack with a
7thSense Pico media server), using 2 × M6 countersunk screws for each:
Leave these slightly loose and present the tray to the rack, engaging the pins in the side plate
slots and easing back into place.
Tighten the screws through the holes and then secure the tray using 1 × M6 standard rack
mounting screws on each side.
Medialon Control System
p 5 of 9
User Reference Manual
M555-1 | 2019-12-4