Emeril FT 42777 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Фритюрниця Emeril FT 42777. Emeril FT 42777 12 сторінок. Deep fryer with oil filtration system
Друкувати сторінку
Emeril
Deep Fryer
™
We recommend filtering the oil after each use to avoid any transfer of flavors and burnt
crumbs.
IMPORTANT: even when filtered after each use, oil should be completely replaced on a
regular basis. We estimate that the oil bath should be changed completely after 10 uses in
average.
•
Wait for the oil to be cool enough, approximately 3 to 4 hours after the last
cooking.
•
Make sure that the filtered oil container is completely empty before draining the
fryer.
•
Only once the oil has cooled down to room temperature, turn the oil filtration knob to the
"FILTER OIL" position, the oil will start filtering automatically.
•
When the filtration is finished, store your oil container in or out of the appliance. If stored
in the appliance, simply turn the oil control knob to the "LOCK" position. Make sure
the appliance always stays flat and it is stored in a cool, dry place at a temperature no
higher than room temperature.
If the oil container is stored out of the appliance, turn the oil control knob to the
"UNLOCK" position and remove the container. Transport with care and place in a cool,
dry place at a temperature no higher than room temperature.
Always carry the unit and oil container flat and with both hands.
•
To re-use the filtered oil, unscrew the oil box cap and empty the oil in the fryer bowl.
•
If solid shortening was used, remove the lid from the oil container and turn the container
upside down to loosen the content. Cut the shortening in small pieces and melt in a
separate pan before carefully pouring into the bowl.
•
Screw the oil box cap back on and insert the empty container back in the fryer, with its
lid and cap. Place the oil filtration knob on the "LOCK" position.
The "Change oil" indicator will illuminate when it is time to use new oil (after 10 uses). If
the indicator is on, replace the filtered oil with new oil and press the "RESET" button for 3
seconds to indicate that new oil is being used.
AFTER SALES SUPPORT
888-525-6745
Oil Filtration
Change Oil Indicator
REFERENCE: FT 42777
9