DaytonAudio APA102 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач DaytonAudio APA102. DaytonAudio APA102 5 сторінок. Class d stereo amplifier 60 wpc

Друкувати сторінку

APPLICATIONS

STEREO SETUP

In this conﬁguration, the mode switch is set to "Stereo". Connect the line out

jacks from a stereo pre-ampliﬁer or source to the MAIN input jacks of your

APA102. Next connect your speakers to the terminals marked "Speaker A"

observing proper polarity. Select the "A" speakers using the front panel zone

selection buttons. Connect a second (optional) pair of speakers to the

terminals marked "Speaker B". If you are connecting 4 speakers to the

APA102 they must be 8 ohm speakers only. Press A and B together to use

both zones.

(From Pre-amp or Receiver Line Out)

Dayton Audio

WARRANTY COVERAGE

Dayton Audio products are warranted to be free of all defects in material and workmanship for 5 YEARS from the date of purchase from

an authorized Dayton Audio dealer. This warranty and all rights provided are limited to the original owner and are non-transfer able.

Dayton Audio's responsibility is limited to replacement or repair as set forth in this warranty statement.

Should a product require warranty service during this period, Dayton Audio will repair or replace without charge, any part or product

proving defective in material or workmanship. All warranty repairs and service must be performed by an authorized Dayton Audio

technician or service facility. The use of non-authorized repair services renders this warranty null and void, and any charges

relating to non-authorized repair are the responsibility of the product owner.

All expenses related to replacing or repairing a defective part or product under this warranty shall be assumed by Dayton Audio.

Dayton Audio reserves the right to replace defective product with a new or factory reconditioned unit.

WARRANTY EXCLUSIONS

1. This warranty does not cover product failure or damage resulting from misuse, abuse, neglect, accidents, alterations, standard

environmental deterioration, natural disasters, or improper use and/or installation.

2. This warranty does not cover cosmetic damage due to misuse or neglect. This includes paint damage, scratches, cracks or other

superficial marks related to improper use.

3. Failures arising from attempted servicing of a non-authorized Dayton Audio repair facility or technician are excluded from this warranty.

LIMITATION OF DAMAGES

In no event shall Dayton Audio be liable for consequential damages for breach of this warranty including installation charges, excessive

shipping expenses, property loss or other incidental loss. Some States do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not apply to the buyer.

HOW TO OBTAIN WARRANTY SERVICE

To obtain services under this warranty, the buyer shall contact Dayton Audio's authorized service provider, Parts Express, at

1-800-338-0531 x 780 to obtain a return authorization number (RA#).

The buyer must carefully pack the warranted product along with a copy of the original purchase receipt, the return authorization number

(RA#), and a description to the repair facility listed below. Shipping for warranty service is the responsibility of the buyer.

Parts Express

Attn: Dayton Audio Warranty Repairs RA# (please write your RA# here)

705 Pleasant Valley Drive

Springboro, Ohio 45066

NOTICE TO BUYER

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

daytonaudio.com

tel + 937.743.8248

[email protected]

SETUP FOR MULTIPLE SOURCE

In the multiple source set up, a distributed audio system is connected to the

APA102 as a local zone ampliﬁer via the MAIN inputs. Normally the distribut-

ed audio system will be the audio source for the APA102 . The distributed

audio is then passed on to be used by additional zones or sub zones in the

distributed system via the MAIN outputs.

Note: Main Out only duplicates what source is connected to the Main Input,

ideal for adding additional Amplifier or connect to Power Subwoofer.

(From Local Source Line Out) (From Pre-amp Line Out) (Out to Additional Zones)

The audio output of a local source, such as an MP3 Player, CD, television,

computer, etc., is connected to the APA102 via the INTERRUPTIN G inputs,

and whenever the local source is active its signal will take priority over the

distributed audio signal present at MAIN input . However, the distributed

audio signal will still be present at the MAIN input. In this circumstance the

audio output of the local source will be heard via the APA102. Once the local

source is turned off or muted, the APA102 will automatically switch back to

the distributed audio system as an audio source, assuming the local source

remains inactive. There is a delay of up to 6 seconds when switching from

INTERRUPTING input back to MAIN inputs.

705 Pleasant Valley Dr.

Springboro, OH 45066

USA

Last Revised: 8/9/2016