Emeril Lagasse SC-01 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для гриль Emeril Lagasse SC-01. Emeril Lagasse SC-01 11 сторінок.
Також для Emeril Lagasse SC-01: Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
General Operating Instructions
General Operating Instructions
Using the Grill Grate
and Oven Racks
The Grill Grate should only be used with the Charcoal
Grilling Chamber. Lower the Grill Grate into the
Charcoal Grilling Chamber.
The Oven Racks should only be used with the Oven
Chamber. Slide the Oven Racks into the shelves in the
Oven Chamber.
Adding Charcoal
See the charcoal manufacturer's instructions to determine
the best method for preparing and lighting charcoal.
PORTABLE GRILL: Place charcoal in the Charcoal
Grilling Chamber.
OVEN: Place charcoal and optional wood chips in the
Charcoal Grilling Chamber.
SLOW COOKER/SMOKER COMBO: Place charcoal in the Charcoal
Grilling Chamber. Additional charcoal and optional wood
chips can be added to the Tray to add extra heat to the
Oven Chamber. Alternatively, the Electric Heating Tray can
be used in the Base.
Adding Charcoal to the
Charcoal Tray
Use the handles on the Charcoal Tray to slide the Charcoal
Tray out of the Base and add charcoal.
Recommended Charcoal Capacities
SLOW COOKING:
3 lb
STANDARD GRILLING:
6 lb
HIGH HEAT GRILLING:
9 lb
12
Emeril Lagasse
™
Southern Cooker
™
General Operating Instructions
General Operating Instructions
Using the Electrical
Heating Element
The Electrical Heating Element can be used in place of
charcoal in the Base (model SC-02 only).
The Electrical Heating Element should only be used with the
Grill/Slow Cooker Combo configuration.
When using the Electrical Heating Element, the square hole
in the Base should face the back of the appliance so that the
Power Cord can come out of the back of the appliance.
NEVER USE CHARCOAL IN THE BASE OR TRAY WHEN
USING THE ELECTRICAL HEATING ELEMENT. ALWAYS
CLEAN CHARCOAL, ASH, OR DEBRIS FROM THE BASE
BEFORE USING THE ELECTRICAL HEATING ELEMENT.
Installing the Electrical
Heating Element
1.
Place the Electrical Heating Element in the Tray. Use
the brackets in the Tray to align the Electrical Heating
Element's Power Cord connection point with the hole in
the back of the Base/Tray.
2.
Screw the Electrical Heating Element into place with
the two screws on either side of the Power Cord
connection point.
3.
When you are ready to cook with the Electrical Heating
Element, plug the Power Cord into the connection point
and then into an electrical outlet. Turn the dial to adjust
the heat.
Uninstalling the Electrical Heating
Element
1.
Unplug the Power Cord from the electrical outlet. Unplug
the Power Cord from the Electrical Heating Element's
Power Cord connection point.
2.
Let the Electrical Heating Element cool for at least
30 minutes after use before uninstalling the Electrical
Heating Element.
3.
Remove the two screws on each side of the Power Cord
connection point.
4.
Remove the Electrical Heating Element from the Base.
5.
Clean the inside of the Base and Tray to remove
any grease or debris that may have accumulated
during use.
13
Emeril Lagasse
™
Southern Cooker
™