GAI-Tronics Titan CB Посібник з встановлення та експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Телефон GAI-Tronics Titan CB. GAI-Tronics Titan CB 20 сторінок. Weather resistant telephones
Друкувати сторінку
5.3. Commander
5.3.1
To ensure weatherproof integrity when wall mounted, external cables
should enter the enclosure from the bottom via the 20mm gland entries
provided.
IMPORTANT:
Do not drill any extra holes as this will invalidate your warranty.
1. Remove rubber feet from the Rear Casing if fitted. Ensuring that the
cable entries are at the bottom offer the Rear Casing up to the
vertical surface and mark through the fixing holes.
Do not use the Rear Casing as a template to drill the holes. Work
only from the marked positions.
2. Drill the holes in the vertical surface to suit the best method of
fixing.
3. Ensure the Rear Casing is securely attached to the vertical surface
using the four 7mm diameter screw holes provided. No sealing
washers are necessary.
IMPORTANT: Do not use countersunk headed fixing screws. Only use
round head, socket cap head or pan head screws. Take care not to
over tighten the screws, doing so may damage the case and will
invalidate your warranty.
12
Wall mounting
Titan CB, Commander CB