DynaGen Tough Series Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер DynaGen Tough Series. DynaGen Tough Series 12 сторінок. Digital generator controllers
Друкувати сторінку
Using the Remote
If the remote panel is not registered and also cannot communicate w ith the local controller it w ill display the follow ing
message.
Check the w iring betw een the local controller and the remote panel.
Once the remote is registered it w ill display one of the follow ing screens depending on if the controller is in the OFF or AUTO
modes.
The remote cannot start the controller w hen it is in the OFF mode. This is to prevent accidental starts w hen the engine or
generator is being w orked on. If the controller is in AUTO then starting from the remote is permitted and the screen notifies
you of such.
If the remote could not register w ith the local controller the below screen is displayed.
Note that the remote is setup to w ork w ith certain systems only. It may not w ork w ith every TE350 or TE410 system. Check
w ith your OEM for assistance.
If communication w ith the controller is lost the remote w ill display the follow ing screen:
3.2
Failure Shutdown
If the local controller has shutdow n due to a failure the follow ing screen w ill be displayed on the remote panel.
TOUGH Series Manual
OFF
AUTO
© 2019 DynaGen Technologies Inc
7