DayTronic 5D40 Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади DayTronic 5D40. DayTronic 5D40 20 сторінок. Panel meter, frequency conditioner module

Друкувати сторінку

RONT

SETUP

SCROLL

-P

ANEL

UTTON

ETUP

RUN-TIME FUNCTION: Press to place the 3000PLUS in SETUP MODE, in order to

change or view the instrument's present setup configuration via the front-panel but-

tons (see Section 3 for full setup instructions).

SETUP FUNCTION: Press repeatedly to step through the sequence of setup stages

(as explained in Section 3.A). At any point during the setup procedure, pressing the

SETUP button and keeping it depressed for about 2 seconds will return the

3000PLUS to normal run-time operation.

CROLL

RUN-TIME FUNCTION: When LIMITS SECURITY (LMS) is ON, cycles through the dis-

play of the meter's three DATA CHANNELS (as described in Section 1.D):

When Channel 1 is on display, displays Channel 2 and lights C2

When Channel 2 is on display, displays Channel 3 and lights C3

When Channel 3 is on display, displays Channel 1 with no channel-indication light

When LIMITS SECURITY (LMS) is OFF, the current LOW-LIMIT and HIGH-LIMIT val-

ues are added to above cycle (when displayed, the limit values may be adjusted by

the local operator as explained in Section 5.E):

When Channel 3 is on display, displays the current LOW LIMIT; lights LM and C2

When LOW LIMIT is on display, displays the current HIGH LIMIT; lights LM and C3

When HIGH LIMIT is on display, displays Channel 1 with no limits or channel-

indication light

SETUP FUNCTION: When the operator is called on to select one of a set of discrete

values for a given setup parameter, this button is used to cycle through the display of

those values (for details, see "Entering a Setup Parameter" in Section 3.A).

RUN-TIME FUNCTION: Used to modify limit values when limits security is OFF (see

Section 5.E).

SETUP FUNCTION: When the operator is called on to adjust the displayed numeric

value of a given setup parameter, this button is used to increase that number—in the

positive direction, regardless of sign—via the method explained in Section 3.A.

OWN

RUN-TIME FUNCTION: Used to modify limit values when limits security is OFF (see

Section 5.E).

SETUP FUNCTION: When the operator is called on to adjust the displayed numeric

value of a given setup parameter, this button is used to decrease that number—in the

negative direction, regardless of sign—via the method explained in Section 3.A. The

DOWN button is also used during setup to answer "NO" to a displayed query such as

"OK(?)," "RETRY(?)," or "RECAL(?)" (see Section 3.B for detailed instructions).

3000PLUS

5D40 I

WITH

1. I

NTRODUCTION

UNCTIONS

NSTRUCTION

ANUAL V

(cont'd)

. SB.3

3KP40 - 1.9