Greatneck 80161 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Пила. Greatneck 80161. Greatneck 80161 18 сторінок. High speed circular saw

WARNING:

saw, use proper circuit protection.

The circular saw is wired at the factory for 110–120 V operation. It must be

connected to a 110–120 V, 15 A time delayed fuse or circuit breaker. To avoid shock

or fire, replace power cord immediately if it is worn, cut or damaged in any way.

ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA

REQUIREMENTS or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage. Prescription

eyeglasses ARE NOT a replacement for proper eye protection.

WARNING:

during operation of a power tool.

WARNING:

sawing.

WARNING:

and other construction activities contains chemicals known to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks, cement and other masonry products

Arsenic and chromium from chemically-treated lumber

Your level of risk from these exposures varies, depending on how often you do

this type of work. To reduce your exposure to these chemicals, work in a well-

ventilated area and work with approved safety equipment such as dust masks

that are specially designed to filter out microscopic particles.

POWER TOOL SAFETY

To avoid electrical hazards, fire hazards or damage to the circular

Non-compliant eyewear can cause serious injury if broken

Always wear a dust mask designed for use when

Some dust created by power sanding, sawing, grinding, drilling

SAVE THESE INSTRUCTIONS FOR REFERENCE