DynaGen BCM-12 Посібник з встановлення та експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Зарядний пристрій DynaGen BCM-12. DynaGen BCM-12 14 сторінок. Battery charge monitor

Друкувати сторінку
Term #
1 & 2
+ Battery connection to BCM unit. This connection is fused through the on board
20 Amp replaceable fuse. This provides main power to operate BCM unit.
3 & 4
Battery ground connection for the controller module. A good ground connection,
directly from the battery, is required for proper operation.
5
Run Output. This output closes to + Battery when actuated. This output energizes
only after a delay on period, when a low battery condition is present.
6
Sense input. This input is used to monitor battery status. If the same battery that
powers up the unit is the battery that is required to be monitored, simply connect
the sense input (T#6) to one of the battery terminals (T#1 or T#2).
7
Not Used
8
Not Used
Operating & Installation Manual for Battery Charge Monitor (BCM)

TERMINAL DESCRIPTION

Description
7