GAI-Tronics PHP400 Посібник з встановлення та експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Телефон екстреної допомоги GAI-Tronics PHP400. GAI-Tronics PHP400 20 сторінок. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
Також для GAI-Tronics PHP400: Посібник з проектування, монтажу та експлуатації (20 сторінок), Посібник з встановлення та експлуатації (20 сторінок)

Where n is the level in dB, minimum 10, maximum 31, the factory default setting is

26.

This command must be entered between entering the PIN and closing the phone

down with *99 (ie during step 5 of the quick programming guide above).

CAUTION - changing this level may cause the phone to be too loud or too quiet,

and in extreme cases could affect the semi duplex operation.

To set the phone back to its factory default volume setting use

*72 26 #

This command must be entered between entering the PIN and closing the phone

down with *99 (ie during step 5 of the quick programming guide above).

Cleaning

Recommended cleaning methods are outlined below:

7.1.

For normal cleaning we recommend "Virosol", manufactured by Clover products.

Carefully follow manufacturer's instructions for storage, handling and use.

7.2.

Stainless steel push-buttons, where fitted, should be cleaned regularly especially if the

Help Point is in a marine environment. The stainless steel may show signs of

discolouration or rust – this will not damage the buttons or impair their performance but

may look unsightly and can be cleaned off using normal cleaning agents as above. In

extreme cases a mild abrasive may be necessary.

7.3.

For graffiti, paint and ink we recommend the use of 3M GR2 graffiti stain remover.

CAUTION: This is a very aggressive chemical. Pay close attention to the manufacturer's

recommendations for storage, handling and use.

7.4.

Where polyurethane anti-graffiti coating or paint has been specified (as an option), it

can be cleaned using Methylated Spirits or Methyl Isobutyl Ketone. Other cleaners can

be used but should be tested on a small area first.

The purchase of your GAI-Tronics product does not end our commitment to you.

In addition to our warranty obligations, GAI-Tronics are able to offer various levels of

maintenance packages, installation and commissioning packages and technical support,

from ad-hoc repairs to full maintenance contracts.

By choosing GAI-Tronics as your aftercare provider you are ensured of manufacturer

expertise and ISO 9001-certified quality control standards throughout the life of the

product.

We can also supply a full range of accessories including mounting posts, beacons and

high-volume sounders.

Contact GAI-Tronics for details.

www.gai-tronics.co.uk

PHP400 GSM Help Point.