GAI-Tronics 7325-106 Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Корпус GAI-Tronics 7325-106. GAI-Tronics 7325-106 7 сторінок. Multi-party amplifier enclosure

Pub. 42004-370E

2 of 6

Model 7325-106 Multi-Party Amplifier Enclosure

Page

System layout and power cable length are very important when installing Page/Party equipment.

Although it varies for different systems, the general guideline is that the total power cable length should

not exceed 1 mile (5280 feet) for 120 V ac systems. The total cable length is the most important

consideration while cable length between the stations is generally not a factor.

Mounting

The Model 7325-106 Weatherproof Metallic Enclosure is supplied with pre-drilled cable openings and

dual 1.25-inch conduit hubs located on both the top and bottom. For these four entries, two have hole

plugs in place and two have (provided) cap plugs to prevent contamination. Remove the plugs if the

entries are to be used.

For specific details including mounting hole dimensions, refer to Figure 1. The suggested mounting

height for all station enclosures is 54 inches (137 cm) up to the centerline of the enclosure.

For continued IP 66 protection, torque setting for securing the amplifier to the enclosure should be 10 to

12 in-lbs. or 1.13 to 1.36 N-m.

Figure 1. Model 7325-106 Enclosure Mounting Details

f:\standard ioms - current release\42004 instr. manuals\42004-370e.doc

09/13