80% Arms FST-1 Посібник оператора - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник оператора для Електроінструмент 80% Arms FST-1. 80% Arms FST-1 12 сторінок.

Друкувати сторінку

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

DANGER:

WARNING:

CAUTION:

NOTICE:

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

Safety Alert

Read Operator's Manual

Eye Protection

Wet Conditions Alert

ELECTRICAL

EXTENSION CORDS

When using a power tool at a considerable distance

from a power source, be sure to use an extension cord

that has the capacity to handle the current the tool will

draw. An undersized cord will cause a drop in line voltage,

resulting in overheating and loss of power. Use the chart

to determine the minimum wire size required in an

extension cord. Only round jacketed cords listed by

Underwriter's Laboratories (UL) should be used.

When

working

outdoors

extension cord that is designed for outside use. This

type of cord is

designated with "WA" or "W" on the

cord's jacket.

Before using any extension cord, inspect it for loose

or exposed wires and cut or worn insulation.

MEANING

Indicates an imminently hazardous situation, which, if not avoided, will result

in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result in

minor or moderate injury.

(Without Safety Alert Symbol) Indicates important information not related to an

injury hazard, such as a situation that may result in property damage.

NAME

Indicates a potential personal injury hazard.

To reduce the risk of injury, user must read and understand

operator's manual before using this product.

Always wear eye protection with side shields marked to comply

with ANSI Z87.1.

Do not expose to rain or use in damp locations.

with

tool,

use

DESIGNATION/EXPLANATION

Cord Length

25'

50'

100'

*Used on 12 gauge - 20 amp circuit.

NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working

area. Position the cord so that it will not get

caught on lumber, tools or other obstructions

while you are working with a power tool.

Failure to do so can result in serious personal

injury.

Wire Size (A.W.G.)*