HID Fargo HDP8500 Процедура оновлення прошивки - Сторінка 2

Переглянути онлайн або завантажити pdf Процедура оновлення прошивки для Принтер HID Fargo HDP8500. HID Fargo HDP8500 5 сторінок.

Update

Tech Update # 394

Number:

Revision

Product:

HDP8500

Date:

May 2017

Type:

HDP8500 Firmware Update Procedure

SUBJECT: HDP8500 Firmware Upgrade Procedure

HDP8500 printers can enter into a cycle of resetting when a firmware upgrade is downloaded to

the printer. This technical update presents how to avoid this situation or how to recover from this

mode and successfully apply a firmware update.

Background

Upgrading the main firmware on the Fargo HDP8500 Printer can sometimes cause the printer to

enter a mode of continuous resetting, resulting in continuous flashing of the front panel display.

This can occur if the printer has version 1.05.05 of the Boot Loader installed.

Corrective Action

2.1

Ensure that you do not upgrade the printer firmware without

first checking your bootloader firmware version.

2.1.1

If your printer has version 1.6.2 or later installed for the main printer

firmware then the issue described here does not apply to your printer.

Determine the installed firmware version from the front panel LCD. Select

the INFO button in the upper left of the home screen and firmware version

will be display as shown below: