Activeforever mr Handsfree Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури Activeforever mr Handsfree. Activeforever mr Handsfree 13 сторінок. Bluetooth wireless headset

Друкувати сторінку

Redial:

Press and hold the MF-button (3) for 3 seconds to redial the last number you called.

ANSWERING / ENDING CALLS

When the Blue Chameleon headset is turned on and there is an incoming call, you will hear a musical tone

and the blue indicator (4) will change to a quick-flashing mode.

or press and hold the MF-button (3) for 3 seconds to reject the call.

the + button (2) to increase the volume and pressing the - button (8) to decrease the volume.

pressing the MF-button (3).

When the headset is turned off, press and hold the MF-button (3) for 3 seconds to turn the headset on.

call will automatically be transferred to the headset.

Note:

Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue

Chameleon headset is turned on. In that case, the headset won't ring when there is an incoming call. Press the

MF-button (3) for 3 sec. to reconnect the headset with your mobile phone for an incoming call.

MUTE FUNCTION

During conversation, it is possible to mute the microphone.

Press and hold the Volume-button (2/8) until you hear a beep to activate the Mute function.

Mute function, press the Volume-button (2/8) once again until you hear a beep.

TRANSFERRING / SWITCHING CALLS / PUTTING CALLS

To transfer a call:

Press and hold the MF-button (3) until you hear a series of 4 tones (from high to low) to transfer the call to the

mobile phone while talking on the headset. The headset will be turned off.

to the headset, press the MF-button (3) again for 3 seconds.

To switch to a second call:

Press and hold the MF-button (3) for 3 seconds to switch to a second call during a call. This function only works

when your mobile phone service provider provides this service (check with your network provider).

To put a call on hold:

Press and hold the MF-button (3) for 3 seconds to put a call on hold.

again for 3 seconds to continue the conversation.

CONNECTING WITH A PC OR PDA

You are allowed to connect the Blue Chameleon headset with a Bluetooth

with Audio Gateway Profiles. Please refer to the user manual of your Bluetooth

information.

www.ActiveForever.com

Press the MF-button (3) to answer the call

Adjust the headset volume by pressing

ON HOLD

If you want to transfer the call back

Press and hold this button (3) once

enabled PC or PDA that is supported

English

End the call by

The

To disable the

enabled PC or PDA for setup