Dynalink H 8182A Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стелажі та підставки Dynalink H 8182A. Dynalink H 8182A 2 сторінки. Articulated flat screen bracket

Installation Instructions:
Step 1A: Solid Concrete Mounting
Step 3B: Attaching the VESA plate
to the monitor (Curved back)
WARNING: If the VESA holes of your TV is shallow, we
recommned using shorter screws instead.
Step 5:
Step 1B: Wood Stud Mounting
Step 4: Hang the TV onto the wall plate
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
• Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any parts of this installation, please contact a professional
installer for assistance.
• The wall/mounting surface must be capable of supporting the combined weight of the mount and the disaply, otherwise the structure must be reinforced.
• Safety gear and proper tools must be used. A minium of two people are required for this installation. Failure to use safety gear can result in proerty damage, serious injury or
death.
• Please check joint parts every two months making sure the screws are not loose.
This product was designed to be installed on wood stud walls and solid concrete walls. Before installing make sure the wall can support combined load of equipment and
hardware. Never exceed the maximum load capacity of 25KG or this may result in product failure or personal injuries.
Note: This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injuries.
Step 2: Put covers on
Contents:
Before attaching
the TV plate to
the wall plate,
tighten the top
screw nut, this is
just a precaution
in case the TV
slides off during
installation.
Step 3A: Attaching the VESA plate
to the monitor ( at screens)
If the bolts A1-A4 is too long, please add A5 at the
rear of the TV Plate.
WARNING: If the VESA holes of your TV is shallow, we
recommned using shorter screws instead.