HID AW2 Посібник зі швидкого встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Блок управління HID AW2. HID AW2 2 сторінки. Wiegand door module

Basic Installation

Wire the readers to the AW2.

Wire the desired inputs to the

AW2.

Wire the locks to the AW2 relay

terminals.

Place the AW2 label in the correct

location on the back page of the

ACW2-XN quick guide. This will be

used during door setup.

HID Access Manager

Required Settings

Go to the 'Doors' menu and click 'Device Discovery' to detect the new

AW2 module

Add/Configure the new doors and readers

Specifications

Wiegand Module (AW2)

Relay Rating

Recommended

Cable Specifications

Note:

It is best practice to use an additional fused power supply for the locks



Trademarks

HID GLOBAL, HID, the HID Brick logo, the Chain Design, ICLASS, ICLASS SE, SEOS, and OMNIKEY are trademarks

or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may

not be used without permission. All other trademarks, service marks, and product or service names are trademarks

or registered trademarks of their respective owners.

Relay 1

Inputs 1

Reader 1

[10A, 28VDC] [5A, 220VAC] [12A, 120VAC]

Input & Wiegand: >=22AWG, Max 150m

Relay: >=18AWG, Max 150M

Relay 2

Inputs 2

Reader 2

AW2